It388 Unit_2_Lab.docx IT-388 Command Line Interface Unit 2 Lab Purdue Global Universit

It388 Unit_2_Lab.docx  IT-388  Command Line Interface  Unit 2 Lab  Purdue Global University   Telnet is a protocol that delivers a command line interface, to interact with remote computers.  Its primary goal was to permit a typical technique of interfacing terminal devices and terminal oriented methods to each other. Telnet is not much protected and its recommended that  it shouldnt be used over the internet. Connecting telnet to a router or switch much is the same procedure. To telnet on Windows, you can install using the Windows Features control panel using command prompt. Telnet does require a vty password to be set, which is a safety measure set by Cisco.  The cisco aux port is added as in additional or backup async port. This is mostly used as a dialup port for remote router management, you will need the same cable as a telephone line to establish this connection. It can be used the same as a console port, using a tool like HyperTerminal can be used to get access with this selection.  The Cisco SDM stands for Security Device Manager, its allows you to configure your router like: ip address, default routing, static and dynamic routing, static and dynamic NATing, hostname, banner, secret password, user accounts and etc. Its a web-based device management tool within cisco routers giving you the option to quickly and easily deploy, configure and monitor your router settings without having knowledge of Ciscos IOS software command-line interface. It guides you step after step router and security con