CSIS 330 Quiz 7 Liberty University Complete Answers

CSIS 330 Quiz 7 Liberty University Complete Answers

The below shown questions is just one version sample.
Download the solution .PDF document for the complete different version solutions and get A grade.

· Question 1

Using an IPv4 network address of 192.168.2.0/26, how many subnets are possible?

· Question 2

1 out of 1 points

You are given an IPv4 network address of 192.168.10.0/24 by your ISP. You need to subnet this network. You know that the subnet mask will be 255.255.255.252. How many usable hosts per subnet are possible in this design?

· Question 3

1 out of 1 points

You have a network that needs 29 subnets while maximizing the number of host addresses available on each subnet. How many bits must you borrow from the host portion of a classful network address to provide the correct subnet mask?

· Question 4

1 out of 1 points

The IP address 198.10.132.67 /26 is a network address.

· Question 5

1 out of 1 points

How many subnetworks can you have with a /18 prefix?

· Question 6

1 out of 1 points

What is the network address for the host assigned to 172.16.4.35/24 ?

· Question 7

1 out of 1 points

The IP address 192.168.15.96 /27 is a network address.

· Question 8

1 out of 1 points

A network administrator needs to create a new network that has 14 computers and two router interfaces (Hint: that’s a total of 16 host addresses needed). What subnet mask will provide the appropriate number of IPv4 addresses for this network with minimal wasted addresses?

· Question 9

1 out of 1 points

Routers and firewall devices have an IP address assigned to each interface.

· Question 10

1 out of 1 points

How many hosts per network can you have with a subnet mask of 255.255.192.0?

· Question 11

1 out of 1 points

IPv4 subnets are created by using one or more of the ____________ bits as ____________ bits.

· Question 12

1 out of 1 points

Network administrators can group devices and services into subnets that are determined by _____________.

· Question 13

1 out of 1 points

Using an IPv4 network address of 192.168.2.0/26, what is the broadcast address in the second subnet (i.e. subnet[1])?

· Question 16

1 out of 1 points

In creating subnets for IPv6, conversion to binary is not required.

:

· Question 17

1 out of 1 points

Any network resource, such as a server or a printer, should always have a dynamic IP address.

· Question 18

1 out of 1 points

Which of the following needs are addressed in performing a network requirement study to plan subnets?

· Question 19

1 out of 1 points

Using an IPv4 network address of 192.168.2.0/26, what is the first usable host address in the first subnet (i.e. subnet[0])?

· Question 21

1 out of 1 points

Which of the following subnet masks is used to represent a prefix mask of / 26

· Question 22

1 out of 1 points

Which class of IP address provides a maximum of only 254 host addresses per network ID?

· Question 23

1 out of 1 points

Within a network, there are two addresses that cannot be assigned to devices. These addresses are the __________________.

· Question 25

1 out of 1 points

With VLSM, the subnet mask will vary depending on how many bits have been borrowed for a particular subnet.