ORGSYS10.docx 1.List the Steps in the Process â This step involves members of the multi

ORGSYS10.docx  1.List the Steps in the Process – This step involves members of the multidisciplinary team coming together to discuss the steps of the process improvement plan.  2.Steps in the process improvement plan as listed on the FMEA table…  ï‚·Step 1: Failure Modes – This step involves a discussion of things that could possibly go wrong with a certain process.  ï‚·Step 2: Failure Causes – This step involves a discussion of possible causes of the failures that were discussed in step one.  ï‚·Step 3: Failure Effects – The failures that were presented in step one are given an effect or possible scenario that may result from the failure.  ï‚·Step 4: Likelihood of Occurrence – The failures listed in step one are rated on a numerical scale of 1-10. A failure rating of 10 would be most likely to occur whereas a rating of 1 would be least likely to occur.  ï‚·Step 5: Likelihood of Detection – This step involves determining the likelihood that a failure would be detected by using a numerical of 1-10. A rating of 10 would indicate that a process has the greatest likelihood of a failure going undetected.  ï‚·Step 6: Severity – This step involves the determination of how severe the failure would be if it were to occur. A numerical scale of 1-10 is used to rate the severity with 10 being the highest severity.  ï‚·Step 7: Risk Priority Number (RPN) – The number ratings of the likelihood of occurrence, likelihood of detection, and severity are multiplied to determine the risk prior